How To Fix Insignia Fire TV Remote?

By Justin Jones On Jun 28, 2022

How To Fix Insignia Fire TV Remote? It’s not the end of the world, it can still be very unpleasant to sit down at the end of a long day to relax with your favorite shows on your Insignia Smart TV only to find that the remote doesn’t function. Sure, it’s not the end of the world, but it can still be quite annoying. Don’t give up hope if you’ve discovered that your Insignia TV remote isn’t functioning correctly.

If the TV remote for your Insignia doesn’t function, try removing the batteries and leaving them out of the device for two to three minutes to see if it helps. If this is the case, you will need to reset your TV to restore the connection. And you should always check to see if the batteries still have life in them.

In the following paragraphs, you will discover assistance and advice on diagnosing issues with your Insignia TV remote and troubleshooting and resolving those issues. Let’s plunge in!

Table of Contents

How To Fix Insignia Fire TV Remote?

First, you need to figure out why the remote for your Insignia Smart TV isn’t functioning correctly before we can move on to discussing potential remedies.

The following is a list of all the possible issues that could be occurring with your remote control:

Your television needs to reset, and the remote control isn’t attached to it.
Your television and its remote control need to be repaired.
The batteries in the remote control are either disconnected or dead.
The remote control has been contaminated with water.
The remote control has suffered internal damage due to being dropped an excessive number of times.
Your TV’s receiver is being obstructed by anything, so the remote cannot transmit a signal to the TV.
Your remote has been subjected to extreme heat, which has caused the internal electronics to become damaged.

Five Things to Try When Having Problems with an Insignia SmartTV Remote

Do A Simple Reset on Your Remote

This may appear to be too easy to be accurate, yet it works more frequently than you’d expect:

Remove the batteries from your remote, then wait around two to three minutes.

Put them where they were.

This has the effect of resetting the settings on various small electronic devices, such as remote controls.

Try your hand at this first before moving on to more involved solutions! You shouldn’t count on it working, but if it does, you’ll be glad you gave it a shot rather than going out and purchasing a new remote control.

Fully Reset Your Insignia Smart TV

The remote control for your television is not particularly difficult to use; even though it operates a smart TV, its operation is dissimilar to any other remote control you have ever employed.

It does this by transmitting an infrared signal to a receiver on your TV, which translates the information in the movement.

This indicates that, out of the two components, the television is much more complicated than the remote control.

You can use the buttons on the side or back panel of your Insignia Smart TV to reset it, or you can download the Insignia Remote App to your smartphone and use that instead.

Here’s how it’s done:

To access the “Settings” menu on the TV, navigate to that menu from the main screen.

After that, choose the “System” option from the menu.

Finally, pick the option to “Reset to Factory Defaults,” and your TV will return to the default settings when it was first manufactured.

This should repair the connection between the TV and the remote if there is a problem.

Remember that to continue using your streaming services after the reset, you will need to sign in again.

Alternative Reset Option

There are still solutions available to you even if you do not have a remote control app on your phone, if your TV does not have buttons, or if both are true.

Holding down the power button on your Insignia Smart TV for ten seconds, or until the display changes, is the quickest and easiest way to do a factory reset.

Holding down the power button for a few minutes while waiting should bring everything back to its original state, just like when you reset your iPhone.

Re-Pair Your Insignia Remote

There will be instances when your Insignia remote won’t work because it has simply lost the ability to pair appropriately with your television.

If that is the case, you must reconnect the batteries in your remote, and you should be good to go.

The remote for your Insignia can be repaired in one of the following three ways:

1) If you have an “improved” Insignia remote, you may easily access the pair button by detaching the back of the remote and look underneath where the batteries are located. If you press and hold the button labeled “Pair,” it should successfully reconnect to your TV.

2) If your remote doesn’t have a pairing button, try pressing and holding the home button for a full minute. This should reset the remote. Be careful to point the remote at your television and keep the button pressed for thirty seconds.

3) If neither of the solutions above works, the third and last alternative is to simultaneously press and hold the menu button, the back button, and the left navigation button for thirty seconds. Once more, check to see that the remote control is pointing in the television’s direction.

Check Your Insignia Smart TV Receiver for Blockage

If something is getting in the way of remote controlling your TV’s receiver, it will not work at all, even though there is nothing wrong with your system.

Most modern televisions contain receivers that are less obvious than they were on older CRT televisions since they are now integrated into the television’s casing.

Because of this, it is often difficult to determine where to position the remote, and it also makes it challenging to choose whether or not a piece of home decor is blocking the receiver.

Check to see that nothing obstructs the receiver on your television before you hastily conclude that your remote control is damaged beyond the point of repair.

It can come down to something as elementary as that: a candle, knickknack, or another item of seasonal decoration has wedged itself between your television and the remote control. You only need to take it out of the equation, and you’ll be good to go!

Purchase a New Remote

You probably didn’t want to hear this, but it’s possible that purchasing a new remote will be your best option in certain situations.

Occasionally, the problem with your remote is caused by a component on the inside of it malfunctioning, shorting out, or failing in some other way, and it then becomes impossible to fix.

TV remote controls can become irreparably damaged if water enters the device, it is dropped an excessive number of times, or it is subjected to high temperatures in any way.

Even though this is the only remedy to an issue with an Insignia TV Remote that costs money, the bad news is that this is the only solution that will work sometimes.

However, because of the nature of our world, there are moments when it is impossible to avoid spending money.

The excellent news is that Insignia TV remotes are available at incredibly affordable prices. You can get one from Amazon for anywhere from $8 to $20, but the price will depend on your TV type.

We’d rather not say it, however. Have you checked the batteries?

Okay, okay – if you hadn’t previously tested the batteries in your Insignia TV remote, you probably wouldn’t be here seeking solutions to your problems with it.

In other words, if your remote isn’t working, you should first check the batteries in your remote!

It’s possible that the batteries are dead, they’ve been disconnected from their housing, or the housing itself has become corrupted like a vehicle battery. Even though it is uncommon, corrosion in a TV remote control might nevertheless take place.

If you’ve had your television for more than a year, there’s a good chance the batteries in the remote control are dead. Therefore, before you investigate the issue any further, you should replace the old batteries with brand-new ones.

Alternative Solution: Use Your Smartphone

There is a mobile app for Insignia, Roku TV, and Amazon Fire TV, each of which allows you to operate your television from your mobile device. These applications can be downloaded from the iOS App Store and the Android/Google Play Store.

You only need to ensure that both your phone and your TV are linked to the same Wi-Fi network after downloading the app on both devices.

People who either do not wish to spend money on a new remote or are in a bind and cannot wait for a new remote to arrive in the mail may find this an excellent alternative.

Wrapping Up: How to Fix an Insignia Remote That Won’t Work

There isn’t much cause for alarm even though your Insignia TV remote isn’t functioning correctly. The remedies are simple to implement and frequently come at no cost (except for buying a replacement).

If your remote control is damaged beyond repair, you still have the option of controlling your TV through the use of a free application.

Which one of the solutions we outlined above did the trick for you? Do you have any suggestions for how other readers dealing with this issue could improve their situation? Leave a comment with your opinions in the section below!

Related Posts