How To Hide Cable Box Behind Tv?

By Justin Jones On Jun 14, 2022

How To Hide Cable Box Behind Tv? After moving into our new home, one of the first things we did was give the outdated fireplace some much-needed TLC. And along with that upgrade came the choice to install the TV over the fireplace. This, of course, leads to the age-old conundrum of figuring out what to do with the cable box. Fortunately, there is an age-old solution to this problem.

Table of Contents

How To Hide Cable Box Behind Tv?

When I was mounting a TV, I made the decision to investigate alternative options for where to put the cable box, ones that would minimize the amount of cable clutter to a minimum. By far the most efficient method for concealing a cable box was to run the cables to a separate room in the house.

It would have been perfect if there had been a chamber hidden behind the wall with a fireplace, as many of the instances demonstrated. Even though there isn’t a room or closet behind the fireplace, I could make use of the room directly above it or the cellar directly below it.

Drilling would be required in order to pass the cables through the wall and into the desired location, although this could be done in a variety of ways. I couldn’t help but wonder how the cable box would function if it were concealed behind a wall. Because of this, I learned that there was another piece of apparatus that I would require, a wired infrared repeater, to increase the signal’s range.

Tuck Away The Cable Box

All of your auxiliary and peripheral equipment Cable boxes, Apple TVs, Rokus, and other similar devices all contribute to the tangled mess of cables, and let’s face it, they are not the most aesthetically pleasing items to have in your field of vision while you are watching a screen.

You might think about concealing them in a multipurpose piece of furniture such as a cabinet or sideboard. You may easily add a hole for the wires using a drill and an attachment called a hole-cutter if the component does not already have a hole for them. Choose an infrared receiver that has a direct connection to the cable box if you do not want to have to open the doors of your entertainment center each time you switch on the television.

Turn Your TV Wires Into A Wall Art

There are several solutions besides only concealing the wires. There are occasions when you can simply leave them out in the open without diminishing their overall aesthetic value. Managing and organizing your TV cords may be done in a way that is both attractive and creative by turning them into wall art.

You are free to make whatever kind of image you like, from a silhouette of a person or city to a silhouette of an object. You have the option of embellishing the cables however you see fit by using colored tapes, ribbons, or stickers to make them resemble flowers with leaves or anything else of your choosing. In addition to that, you may hang some huge letters or postcards. Your imagination is the only thing holding you back.

Before you place the wires, you should first sketch a rough shape on the wall using a pencil that can be readily wiped. First, you need to determine how long the wires are, and then you can plan the artwork accordingly. Wall clips or mounting tape can be used to secure the cables to the wall in any desired position.

Put It On Your Mantle

If you are fortunate enough to have a fireplace with a wide mantle, it is possible that you will be able to install the cable box just underneath your television. Nevertheless, the vast majority of fireplaces do not come equipped with this feature. Therefore, you shouldn’t beat yourself up if it’s not too big.

You might want to think about acquiring a cable box stand if your mantle is on the narrow side. Because of this, you’ll be able to position the cable box in a vertical orientation, and the stand should come with a provision for attaching it to the wall. Therefore, you can place it on the mantle like this, but the support will prevent the cable box from toppling over.

How Do I Connect My Cable Box To My TV Wirelessly?

Simply connecting a transmitter to the existing set-top box in your living room and a receiver to your television is all that is required to use a wireless video HDMI kit. People who do not wish to extend wires throughout the house can benefit greatly from this alternative. Instead, you and your companions can experience streaming content wirelessly regardless of where your television is located.

The easiest method of concealing a cable box is outlined in the following step-by-step instructions.

Can you mount a cable box behind a TV?

In order to successfully mount a cable box behind a television, you will need the following two things:

Location of the power outlet behind the TV (for FULLY hidden setup). You can still conceal 99 percent of the boxes and cables behind your TV, even if there isn’t an outlet there. You’ll just have one power cord to discretely mount to feed everything that’s going behind your TV. Note that this is possible even if you don’t have an outlet behind your TV.
The cable hookup is located behind the TV (again, for a FULLY hidden setup). There is also the option of covertly mounting a cable wire together with your power cord.

How to hide a cable box

Step 1: Placing the boxes

To ensure that your television remains in the same position after it has been mounted, you will need to ensure that all of the mounting hardware is in place before you hang the television.

If your television already has a mount attached to it, you will first need to remove it from the mount. If your television is mounted on a swivel mount, it is highly likely that you will be able to install your boxes without having to remove the television from its mount.

Have a friend hold up each piece of equipment in the spot you think will work while you sit down on the couch and check for visibility. In either case, you’ll want to make sure that your placement of the boxes won’t be seen from your primary viewing position. This can be accomplished by having a friend hold up the equipment.

Step 2: Place velcro

I would suggest using at least two strips of velcro for each unit that you wish to be hidden. Because of this, you won’t ever have to worry about cable boxes or modems dropping or being unattached (considering that the majority of cable boxes won’t weigh more than 5 pounds, 2 strips should easily be sufficient). In addition, the boxes are stabilized by having two independent points of contact, which ensures that the bottom will not sag over the course of time.

Step 3: Install the power strip

Because each of these boxes needs power, you will need to purchase a power strip similar to the one seen here. In addition, a Velcro power strip. Ensure that it is equipped with a surge protector to safeguard everything.

Step 4:Install infrared repeater

Install the Infrared Repeater to the back of the cable box.

Step 5: Wrap wires

Make loops with your wires, and then utilize the loops to keep the wires twisted up.

Run Your Cables To Another Room

In many homes, the use of a single cable box is shared among several different rooms. Bringing the cables into another room, such as an AV closet, is one of the most effective ways to handle the situation. The most effective method for reducing the amount of clutter caused by the cables is to tie them all together and route them to the cable box by running them down the mantle and down the corner of the room.

In the world of cable installers and interior designers, this kind of solution is referred to as a “home run.” It may not have the most appealing appearance, but it gets the job done! You could even wrap some ribbon or a year-round garland around the cables if you wanted to. In this manner, it is attractive to the eye while yet bringing your favorite television shows into your living room.

Hide Your TV Wires Behind A Panelboard

You can put up a panel to disguise the cords that are hanging from your TV if you’re feeling particularly clever. Panelboards are available in a wide variety of shapes and dimensions. You have the option of selecting one that has a complicated pattern or one that is more straightforward.

Can’t seem to land on a design you’re happy with? No problem! Simply drape some fabric over the panel or board, and you should be ready to go. You may even paint it to match the color of your wall or select a pattern that will make your television more noticeable. In order to conceal the cables without spending more money on a panel of cloth, you can use wood pallets as a substitute. For a more farmhouse or rustic look, you can either paint the pallet board or leave it in its natural state.

Hide Your TV Wires In Plain Sight

The creative type should definitely consider pursuing this concept. You just need a little creativity and some cords from your cluttered TV to make a work of art out of them. To fashion a pattern out of your wires, all you have to do is make use of some double-sided tape, adhesive, cable clips made of transparent plastic, or any other approach that is unobtrusive.

You may even make more complicated geometric designs using the cables from your TV, or you can use the wires to create a city skyline if you are feeling more adventurous. Creating computer chip designs utilizing the TV wires is a design that is sure to win over the hearts of homeowners who are interested in technology.

Related Posts