Why Does My Insignia TV Keep Turning Off?

44

Why Does My Insignia TV Keep Turning Off? The sound of people conversing in the living room is what initially jolts you awake. You quickly grab the heaviest frying pan you own and sneak into the kitchen, only to discover that the television is on but nobody is watching it. There is no cause for alarm; it is not a ghost. (Well, it’s probably not going to turn out to be a ghost.) If your television keeps waking itself up by turning itself on or off at random, it’s probably because another piece of technology is disturbing your sleep. The following is a guide for troubleshooting.

Why Does My Insignia TV Keep Turning Off?

Unplug Your TV (and Plug It Into the Wall).

Before attempting anything else, you should power the device down completely and then turn it back on again. In this particular instance, however, you will need to totally unplug your television, hold down the power button for ten seconds, and then plug it back in to see whether or not the issue has been resolved.

Why Does My Insignia TV Keep Turning Off?

If you are utilizing a surge protector, you should try connecting it straight into a wall socket so that you can exclude this as a possible variable. If it was already plugged into the wall, try another outlet; ideally, one that is not attached to a switch will do the trick. In this particular scenario, you should also consider plugging it into a surge protector.

Turn Off HDMI-CEC

If I were a betting man, I’d put money on HDMI-CEC being the cause of your power issues because it seems to be the most likely suspect. Over HDMI, your electronic gadgets can communicate with one another using a feature known as Consumer Electronics Control, or CEC for short. For instance, when you turn on your PlayStation, CEC may instantly turn on your TV and switch it to the appropriate input, saving you the hassle of locating your other remote control device. This can be quite convenient, but when it operates erratically, it means that your TV will turn on and off as a result of signals being misread.

If you go into the settings of your TV, you can try turning off CEC to see if it fixes the issue. Because different manufacturers give CEC their own brand names (Sony calls it Bravia Sync, Samsung calls it Anynet+, and LG calls it SimpLink), you might need to do some research online to find out what the relevant setting is named on your television. In the event that this resolves the issue, but you would still like to make use of CEC, you will need to begin disabling CEC on all of your other devices until you determine which one is the source of the random signal.

Disconnect From Wi-Fi

Ironically, the “smart” capabilities included in many TVs have a tendency to make the devices appear less intelligent than they actually are. If your TV is connected to other smart home devices, such as SmartThings, Alexa, Google Home, or Logitech Harmony, it is possible that a routine or another form of automation is turning your TV on or off by accident. This could happen. It’s possible that if you try to watch a video on YouTube, your phone is automatically “casting” the video to your TV if your TV has this capability built-in.

Before you begin searching through each of these applications, open the settings on your television and unplug it from the Wi-Fi network for a few days. If the smart services are unable to connect, they are unable to transmit those unintended signals. If turning off Wi-Fi resolves the issue, you will likely need to investigate your other smart apps and gadgets to see which one, if any, is interfering with your TV on a regular basis.

Check Your TV’s Power Timer

Many of today’s televisions are equipped with a built-in timer that enables the user to switch the TV on or off at a predetermined hour of the day. It is likely that a child or a cat sitting on the remote control caused this to be set up inadvertently, especially if you find that your television turns on or off at the exact same time every day. Explore the menus of the settings on your TV to look for the power-scheduling option and make sure that it is turned off once you find it.

Change the Batteries in Your Remote

It’s possible that your remote, which is operating on a battery that’s becoming low, is sending out erroneous signals because its power is fluctuating. If you’re having trouble with your remote, you can try giving it a fresh set of batteries to see if that helps. Be sure to give the buttons a thorough cleaning while you’re at it. It is possible that the power button is sticky as a result of the time you spilled cola all over the place, in which case the TV could be turned off by the button simply sticking down.

Look for Nearby TVs

The vast majority of televisions shouldn’t cause interference with one another, however, televisions of the same brand should be able to quickly pick up remote controls from one another if they are in close proximity. For instance, if you have a Vizio television set in the living room as well as a Vizio television set in the room across the hall, the remote signals from one area could potentially affect the TV in the other room.

It’s unlikely, but it’s possible that your next-door neighbor is using a universal remote, which could be transmitting compatible codes to your TV. This scenario is not common, but it is possible. (I’ve even heard accounts of direct sunlight streaming through a window confounding the infrared sensors and turning the TV on; however, I’ve never been in a situation where this happened to me personally.)

Adjust Your TV’s Eco Mode

When you click the power button on many current televisions, the device does not immediately turn itself off completely. They instead enter a condition of low-power sleep, which enables them to make use of a significant number of the properties discussed earlier (like turning on when someone casts a YouTube video from their phone).

You could try turning on the “Eco Mode” feature of your television if you are having trouble figuring out what the issue is. When you are finished watching, this will, in essence, switch off your TV completely. The name of this feature may vary from brand to brand, but its function is the same. It’s possible that some of the built-in features won’t work, but it should at least provide you some peace of mind while you investigate the issue. It is also recommended that you check the Eco Mode on your soundbar or any other devices, since they may be sending signals to the TV even when they are in sleep mode.

Again, as is the case with many forms of technology, these issues are frequently caused by software bugs that may be resolved by installing an update. However, I include this last since upgrades to TV firmware can occasionally bring their own problems. Because of this, I only advocate updating if it is absolutely required.

If you have not yet identified the cause of the issue, navigate to the settings menu of your television and check to see if a newer version of the TV’s firmware is available. If your TV is one of those that requires you to manually install the firmware using a flash drive, check the manufacturer’s support website to see if they have made any firmware upgrades available for your specific model.

Perform a Factory Reset

If you have tried everything else and nothing has worked, it may be time to resort to extreme measures and restore your TV to its original factory settings. It would be ideal if the problematic setting could be restored to its previous state, which is the default. If you do decide to modify your settings again, just keep in mind that you should do so one at a time and wait at least a few days in between each change. In this manner, if the issue occurs again, you will know without a doubt which setting was the culprit.

If resetting to factory settings does not solve the problem, you should seek assistance from the device’s maker. There is a possibility that the model of your TV has a flaw or a hardware fault that is well-known, and a specialist may be able to cure the issue once and for all.

Again, as is the case with many forms of technology, these issues are frequently caused by software bugs that may be resolved by installing an update. However, I include this last since upgrades to TV firmware can occasionally bring their own problems. Because of this, I only advocate updating if it is absolutely required.

If you have not yet identified the cause of the issue, navigate to the settings menu of your television and check to see if a newer version of the TV’s firmware is available. If your TV is one of those that requires you to manually install the firmware using a flash drive, check the manufacturer’s support website to see if they have made any firmware upgrades available for your specific model.

Related Posts